The REINFORCER WR-500 Wired VRA system combines motion and attention getting light patterns to successfully perform pediatric hearing testing. Each smoked Plexiglass box features a friendly cartoon character that lights up and moves back and forth rapidly and quietly when activated. Additionally a horseshoe shaped light bar with 20 bright LEDs flash sequentially or in a marquee pattern to vary the combination of lights and motion reinforcement. The lightweight Plexiglass boxes are triangular shaped to mount easily in the corners of the sound room with Velcro or double back tape. This user installable system operates at low voltages for safety and uses modular (telephone style) plug in connectors to easily install the system into a sound room. Optional centering box and foot switch are available.

KEY FEATURES

• EASY TO INSTALL
• TRIANGULAR SHAPED BOXES FIT COMPLETELY INTO CORNERS
• WAVE/MARQUEE LIGHT PATTERNS
• FULL MOTION ACTION
• SEPERATE MOTOR (ACTION) CONTROL -NEW

SYSTEM INCLUDES

• Two Triangular Plexiglass Boxes
• Wireless Hand-Held Multifunction Remote Control
• Plug-In Wall Transformer
• 20 ft Long Interface Cables

OPTIONAL ACCESSORIES

• Centering Box
• Installation Kit

WR-500 Wired VRA System

New and improved WR-500 QUAD Wired control console offering more features and greater
reliability. The first VRA system to offer simultaneous operation of FOUR REINFORCER
BOXES in the booth ! The WR-500 QUAD will control two or four boxes either independently
or locked for upper and lower synchrony of operation. The control panel has been upgraded to
quiet membrane switches with good tactile feel to operate the unit without needing to seek but-
ton locations visually.

New features include: Complete control over 4 light patterns, motion and figure lighting sepa-
rately, new timing function that will allow programming the unit to present the stimulus mo-
mentarily (as long as the button is pressed) or for one second intervals each time the button is
actuated, blinking indicators to show the last side presented during a testing session, optional
footswitch to control Right/Left /or Center functions remotely.

KEY FEATURES

• EASY TO INSTALL
• TRIANGULAR SHAPED BOXES FIT COMPLETELY INTO CORNERS
• WAVE/MARQUEE/DOT/BLINKING LIGHT PATTERNS
• FULL MOTION ACTION
• SEPERATE MOTOR (ACTION) CONTROL -NEW

SYSTEM INCLUDES

• Four Triangular Plexiglass Boxes
• Smart Control Console
• Plug-In Wall Transformer
• 20 ft Long Interface Cables

OPTIONAL ACCESSORIES

• Centering Box
• Installation Kit

WR-500 QUAD Wired VRA System

QUAD Control Console

Low Profile VRA/COR

KEY FEATURES

• Low profile design
• Fits into small booths
• Dimensions 7" x 7" x 5 1/4"
• Wired or Wireless Remote Control
• Lighted figure and LED array
• Easy to install

Low Profile System

Low Profile Center Box

CENTERING BOX

A separate CENTERING BOX can be added to either the WIRED or WIRELESS XM-1000 VideoVRA system to re-orient the child’s attention back to the center in-between stimulus presentations. This lighted stationary figure is housed in a square (7” X 8”) box for easy mounting to a flat wall. A 20 foot cable is routed back to the main REINFORCER BOX (or Control Console-wired systems) for control signals and power from the main system.

º Lighted stationary figure to re-orient child's attention

ºAvailable for wired, wireless or video systems

º Lightweight square plexiglass box mounts easily to booth wall

º An optional L-shaped mounting bracket and extension cable are available

--DISCONTINUED--

Centering Box

Low Profile Centering Box with 4 button remote

Video VRA Centering Box, LCD

FOOT SWITCH VRA CONTROL

The optional foot switch control will provide handsfree operation for our Wired VRA systems. The switch consists of two pedals, press on the right one and the right side box of your VRA goes into action and shuts off immediately when you release. We highly recommend this accessory with any Wired VRA purchase.